| The Aquabot Turbo T features a new and innovative navigation system. It follows an advanced pattern like others in the T series but steers in a very interesting way. The unit is equipped with a small float that causes one side of the unit to lift from the bottom when the pump is momentarily turned off by the internal robotic controller. This loss of traction on one side allows the unit to change direction without the need for more complex (an expensive) components. This results in a much more efficient and shorter cleaning cycle and makes it ideal for all pools. A Cleaning cycles take about 3 hours which also reduces wear and tear on robot dramatically. In addition, the T series units incorporate a water jet that gently power washes to lift stubborn debris from cracks, crevices and tight corners. Sealed, oil free low voltage motors power the unit steer it effortlessly around the pool. If you require remote control, or an even more efficient cleaning cycle, take a look at the "top of the line" Aquabot Turbo T4. It features a remote control for spot cleaning and an even more efficient cleaning cycle. Operating independently of the the main pool filter, the Aquabot Turbo T works with no hoses, no hookups, no booster pumps or suction lines. Just place it in the water, push a button and that's it! The pool gets cleaned automatically in record time! Just like all Aquabots, the Aquabot Turbo T utilizes a highly efficient, reusable filter bag and power driven scrubbing brushes. The robot is capable of filtering unwanted debris as small as 2 microns in size, yet still allows up to 5000 gallons of water to flow through per hour. This results in the removal of sand, silt, hair, metal particles, bacteria, and most algae. In addition, large debris such as acorns, leaves, and twigs, are quickly and permanently removed. This leaves you with a cleaner, healthier and more beautiful pool. The Aquabot Turbo T comes with a 3 year limited warranty.
|
